Setbox workbench
Ergonomics
The SetBox workbench aims to allow students to create mechanical and electronic devices in an organized way, encouraging group learning. Its design was created to facilitate access to components and tools that will be used in each project.
DIFFERENTIALS
Top
35 mm Teak top with large area for collective work.
Perforated plate
On the sides of the workbench are the tools, fixed and organized through brackets fitted in the holes of the perforated plate.
Setbox boxes
The structure has two columns of Setbox boxes that can be of different colors and sizes, configured according to the needs of each school.
Adjustable shelf
Shelf in steel that can be height-adjusted according to the predefined fixings on the structure.
Tips
Noise-free tips that do not damage the floor.
Casters
The bench has castors on one side, making it easy to move.
Various combinations
The Setbox Bench makes it possible to configure various combinations of setbox boxes through the use of rails, meeting the needs of each activity.
Each pair of rails supports one setbox box. They are fitted to the metallic column, making it possible to vary the combinations or order of the boxes.
Note: Boxes and rails sold separately.
Work in pairs or in groups
The Setbox Metadil workbench allows students to have a column of tools and a column of Setbox boxes for each pair. It also offers the possibility of working in groups of 4 people.
Double work
Working in pairs with students facing each other, allowing access to tools on the side of the workbench.
Group work
Both sides of the bench are intended for group activities.
- 5 years for manufacturing defects.
- Permanent supply of parts.
MODELS
Setbox workbench
Model | Top (W x H x D) |
SBMC1680 | 160 x 92 x 80 cm |
Rail
Model | Top (W x H x D) |
TG40 | 2 x 2 x 40 cm |
MODELS WITH BOXES
Setbox workbench
Model | Top (W x H x D) |
SBMC1680-CX1 | 160 x 92 x 80 cm |
Setbox workbench
Model | Top (W x H x D) |
SBMC1680-CX2 | 160 x 92 x 80 cm |
Setbox workbench
Model | Top (W x H x D) |
SBMC1680-CX3 | 160 x 92 x 80 cm |
Setbox workbench
Model | Top (W x H x D) |
SBMC1680-CX4 | 160 x 92 x 80 cm |
Setbox workbench
Model | Top (W x H x D) |
SBMC1680-CX5 | 160 x 92 x 80 cm |
Note: The setbox boxes have the correct position and direction for fitting on the rails, so it is only possible to handle the boxes on one side of the workbench.
For benches of 92 cm in height, benches 65 cm in height must be used (4415).
* Stools are recommended due to the free space for the students’ legs.
TOOL HOLDERS
Custom tool holders are sold separately.
Pliers holder
Model | W x H x D |
K-CH20699 | 3 x 6 x 5 cm |
Wrench kit holder
Model | W x H x D |
K-CH20700 | 12 x 6 x 2 cm |
Tape measure holder
Model | W x H x D |
K-CH20701 | 9 x 6 x 5 cm |
Screwdriver holder
Model | W x H x D |
K-CH20702 | 12 x 7 x 5 cm |
Wrench holder
Model | W x H x D |
K-CH20722 | 13 x 21 x 3 cm |
Eraser holder
Model | W x H x D |
K-CH20723 | 9 x 7 x 5 cm |
COLORS AND FINISHES SIMULATOR
COLORS AND FINISHES
Metal structure and tips
Top